COMING SOON!

NEW LAUNCH!! Handheld, Explosion-proof Industrial Acoustic Imager for ultrasound detection of Gas Leakages, Partial Discharge and other applications

NEW LAUNCH! Battery Analyser for testing Battery Voltage, Battery Capacity, Cold Start Current, Internal Resistance, State of Health & State of Charg

NEW LAUNCH!! Battery Analyser for testing Battery Voltage, Battery Capacity, Cold Start Current, Internal Resistance, State of Health & State of Char

Battery Impedance Tester is used to check Internal Resistance, Voltage, Current and Temperature for batteries. It is designed for measuring the inter

Fuel cell type digital Alcohol Sensor with high accuracy, fast response/recovery time, convenient and fast detection. Two acousto-optic alarms for dr

Digital Cable Fault Locator for Power, Control and Telecom Cables buries underground.

Digital Cable and Cable Fault Locator featuring a Transmitter and Receiver used to detect or trace conductors and find short faults in them.

3-1/2 Digits, LCD, Zero Adjustment, up to 20mF Capacitance Measurement

The M-1000 Analogue Clamp can measure up to 1000A and has been designed according to IEC 1010, it fits in with 600V CAT III of IEC1010 and pollution

3-3/4 digits (4000 counts) backlit LCD, TRMS, PV Voltage upto 1500V DC, AC Voltage, AC/DC Current. Peak Current, Resistance, Capacitance, Frequency,

NEW LAUNCH!! 4000 Counts, 3 3/4 digits, Backlit LCD. Jaw Opening 35mm. TRMS 1000A AC, DC 1000A, TRMS 1000V AC, 1500V DC, Frequency, Resistance, Capac

Acidity Testing Kit used to measure the Acidic content of Transformer Oil

NEW LAUNCH!! Industrial Acoustic Imager with Thermal Imager module for detecting/diagnosing gas leakage, partial discharge, featuring 128 MEMS microp

Explosion-proof Industrial Acoustic Imager with 128 MEMS microphones & real-time sound image display to detect pressurised or vacuum leaks & partial

Industrial Acoustic Imager with 128 MEMS microphones & real-time sound image display to detect pressurised or vacuum leaks & partial discharges.

Black Body Source for Calibrating Infrared Thermometer from 50° to 500°C

Used for calibrating grounding resistance testers, equipotential testers and other instruments which require a standard resistor.

Hand Held, 3-1/2 Digits, Battery Operated, 0 – 19.99/24mA, -199.9mV to 199.9mV source and current & power measurement.

NEW LAUNCH!! Bench type with Rechargeable Battery & 20,000 counts, 4 1/2 digit LED display. Source for 0 – 199.99mV / 1.9999V /19.999V, 0 – 199.99μA

NEW LAUNCH!! Measurement and Source for 100mV / 30V DC Voltage, 20mA DC Current and switching value measurements. Supports manual Step Output, Automa

5 Digits, 0.05% Accuracy, Sources DC Current, Analogue Transducer & Loop Power and Measures DC Voltage, DC Current and Loop Power Supply. IP40 and 1m

New Launch!! Cable Fault Locator to effortlessly track underground / hidden cables and wires upto 2.5 meters depth with Energised/Live wire detection

Cable Fault Locator for Telecom Cables to measure the exact fault location such as the broken line, cross faults, earthing, poor insulation, and poor

NEW LAUNCH! A comprehensive cable path detection instrument. Pipeline path detection, cable identification, fault search & other functions. Composed

Multi-frequency Cable Route Tracer and Locator serves as a Pipe and Cable Tracer for underground pipelines and cables without the need for excavation

A reliable, accurate, powerful mV mA Loop Calibrator with HART COMMUNICATOR featuring high accuracy of 0.01%.

6 Digits, 0.2% Accuracy, Sources and Measures DC Voltage, DC Current, Analogue Transducer and LOOP Power. Also measure Pressure with optional module.

5 Digits, 0.5% Accuarcy, Sources DC Current, Analogue Transducer & Loop Power and Measures DC Voltage, DC Current and Loop Current.

New Launch!! High precision Signal Generator, Multifunction Process Calibrator and Digital Multimeter all-in-one. Output simulation: 0/4-20mA source/

Hand Held, 4 Digits Large LCD Display, Measures and Provides output for 20mV / 100mV / 15V DC, Current output up to 24mA, 24V Loop Power, Resistance

4 & 5 digits Digital Multimeter and DC mV / Voltage / Frequency / Resistance / mA Calibrator and also provides output for all types of Thermocouples

5 Digits, Digital Multimeter combined with source for DC voltage, resistance, frequency, thermocouples, thermal resistance, and DC current. supply po

Bench-type RTD Calibrator, Outputs availble at -200, -100, -50, -25, 0, 25, 50, 100, 150, 200, 300, 400, 500, 600 °C

CEM SC-05 Sound Level Calibrator provides signals of 94dB and 114dB for Sound Calibration at 1kHz. Accurate and simple to use; it fits 1/2” diameter

Calibrator for instant and reliable calibration of Non – Contact tachometers upto 199999 RPM.

The VIB-CAL-01 combines signal generator, power amplifier, standard transducer and a shaker in one housing and features a small size, high accuracy a

With 5 decades of Capacitance ranges and slide switches to allow easy addition and subtraction of capacitance values.

Intelligent, portable Ammonia Detector 0-100ppm & 0.1ppm resolution. With built-in pump detection mode. Integrated water vapour and dust filter for u

Multifunction Installation Tester with a 3.5″ TFT colour LCD display, provides Insulation Resistance, Earth Resistance, Loop Impedance, Voltage, RCD,

Clamp Jaw Dia 34mm, AC/DC Voltage, AC Current 600A, Resistance & Temperature. Pointer Lock

3-3/4 digits, backlit LCD, T-RMS, wide AC/DC Ampere range (4.000 to 1000A), bar graph, high resolution, best accuracy, one-touch zero, Inrush current

Flexible Coil Clamp-on Power Meter for the field measurement of Single & Three Phase AC Voltage, Current, Leakage Current, Phase between Voltage, Pha

NEW LAUNCH!! 4-in-1 innovative experience which combines T-RMS Clamp Meter, Multimeter, Oscilloscope & Data Recorder functions. 20,000 Counts IPS LCD

M-4673 mini digital leakage current clamp meter features high reliability, safety, precision and compact design with 1mA resolution. AC/DC Current ra

9999 digits, 35mm Ultra-thin Jaws, 2500VDC, 1500VAC, 1000AAC, 1000ADC & DC Power 2000kW (using external flexible clamp), Low-pass Filter, Inrush Curr

Professional T-RMS Industrial AC/DC Clamp Meter with TFT Colour Display with Bluetooth and IP65. High accuracy & 1500V DC for Solar & Photovoltaic Ap

6000 Counts, Backlit LCD, Single Phase and Three Phase, Non Contact Voltage Detector, Data Hold, Peak Hold, Relative, Max/Min Reocrd, Single Phase KW

4 Digits, Dual LCD, Single Phase and Three Phase, Max /Min / Peak Hold, 55mm Jaw Dia, T-RMS, AC Voltage, AC Current up to 1000A, KW, KVA, KVAR, Power

AC Leakage Current Clamp Meter 3-1/2 Digits LCD, Data Hold, Max Hold, 30mm Jaw Dia, 0 – 200mA / 2A / 200A AC.

3-5/6-digit 5999 Count, Backlight LCD, T-RMS, Auto-Ranging, NCV, Flashlight, Relative Measurement, AC(750V)/DC(1000V) Voltage, 600A AC Current, Resis

3-3/4 Digits, Analogue Bargraph, LCD, Data Hold, MAX/MIN Record, 30mm Jaw Size, AC Voltage 400V, AC Current 100A, Resistance 400Ω. Has Low Pass Filte

2000 counts, Backlit LCD, T-RMS, 600V AC/DC, 400A AC, Capacitance upto 2mF, Resistance upto 20MΩ, Frequency, Continuity & Diode Test. Max / Min, Non-

3-3/4 Digits, Backlit LCD, Data Hold, 30mm Jaw Size, AC/DC Voltage, AC Current up to 1000A, Resistance, Capacitance, Temperature, Frequency, Duty Cyc

6000 counts, Data Hold, NCV, 34mm Jaw Size, AC/DC Voltage 1000V, T-RMS AC Current up to 1000A, VFD Voltage, Resistance, Capacitance, Frequency, Duty

4 Digits, Dual LCD, Harmonic Analysis up to 50th Harmonic, PC Interface, Single Phase & Three Phase, Maximum Demand, KW, KVA, KVAR, KWh, KVAh, KVArH,

10000 counts Digital Clamp-on Power Meter. with AC/DC Voltage and AC/DC Current Auto Detection, NCV, Jaw Dia 42mm, KW, PF, THD up to 25th Harmonics.

3999 Counts, Backlit LCD Display, TRMS, 600V AC/DC, 400A AC/DC, Resistance 40MΩ, Capacitance 100mF, Frequency, Continuity & Diode Test, Temperature.

3 5/6 Digits TRMS Clamp Meter, 6000 Counts, 1000V AC/DC, 1000A AC/DC with LoZ, Inrush, Peak, VFD, Capacitance, Frequency, Resistance, Temperature, Co

6000 Counts, Backlit 2″ LCD, LED Flashlight, Auto-ranging & Manual, Auto Power Off, T-RMS, Non-contact Voltage detection, Data Hold, AC/DC Voltage, A

AC/DC Auto-ranging Leakage Current Clamp Meter, 0.1mA resolution, 5000 counts, Backlit LCD, Data Hold, 23mm Jaw Size, AC/DC Voltage, AC/DC Leakage Cu

50,000 Counts Colour Display, AC/DC Voltage 1000V, AC+DC Voltage, AC/DC Current 1000A, Bluetooth, 100kHz Bandwidth, Trend Capture, Low Pass Filter,

COMING SOON!

3-3/4 Digits, Backlit LCD, Peak & Data Hold, T-RMS, Wireless PC Interface, 30mm jaw size, AC/DC Voltage, AC Current, Resistance, Capacitance, Frequen

3-5/6-digit 5999 Count, Backlight LCD, T-RMS, Auto-Ranging, NCV, Flashlight, Relative Measurement, AC(750V)/DC(1000V) Voltage, 600A AC/DC Current, Re

3-4/5 Digits 6000 Counts, LCD, Data Hold,T-RMS, 30mm Jaw Size, AC/DC Voltage, AC/DC Current up to 1000A, Resistance,Capacitance, Frequency and Temper

AC 0.00mA～300A. Jaw Size Φ40mm. True virtual value measurement, filtering function, maximum/minimum /average value, harmonics, distortion rate, etc.,

AC 0.00mA～2000A. Jaw Size 80mm. True virtual value measurement, filtering function, maximum/minimum /average value, harmonics, distortion rate, etc.,

AC 0.00mA～1200A. Jaw Size Φ70mm. True virtual value measurement, filtering function, maximum/minimum /average value, harmonics, distortion rate, etc.

AC/DC Leakage Current Clamp Meter 3-3/4 Digits, LCD, Data Hold, 23mm Jaw Size, AC/DC Voltage, AC/DC Leakage Current measurement, Capacitance, Resista

TRMS AC Leakage Current Clamp Meter 6000 Counts, Auto-Backlit LCD Display, Auto Power Off, as per IEC 61557-13: Class 2, 40mm Jaw Dia, IEC / EN 61010

The Milliamp Process Clamp Meter is a hand-held battery-operated clamp meter that measures 4-20 mA DC without breaking the electrical circuit. Unlike

Test Leads have a right-angled shrouded termination to fit modern Digital Multimeters and other test equipment fitted with a 4mm shrouded sockets.

1m Silicon, double-insulated test leads with right angle shrouded banana plugs, CAT IV 600V, CAT III 1000V with protective cap, banana plug terminati

1m silicon single insulated test leads with right angle shrouded banana plugs, CAT IV 600V, CAT III 1000V with protective cap, banana plug terminatio

Multi-channel Data Logger with IoT. 8 groups of different modules can be inserted for various data acquisitions and functions, like relay output, pow

Sound Level Data logger to record sound, from 30 to 130 dB, with 129920 data points.

Temperature and Humidity Data Logger with dual display LCD, Data Logging up to 32700 points, USB PC interface, PDF & XLS data file download, long-las

32 channels displayed simultaneously, 1 second Interval, can record for 97 days. List, Curve, Histogram display. Customise channel names & export EXC

Data Logger for Voltage and Current with digital display and 100096 data points

Quick-response capacitance sensor, accurate measurement for wet bulb globe temperature(WBGT), black globe temperature(TG), humidity(%RH), air tempera

Earth and Ground Fault Locator for fast location of earth faults on the DC system, to avoid the damage in the event of a second fault. Directly locat

With 5 decades of Capacitance ranges and slide switches to allow easy addition and subtraction of capacitance values.

With 7 decades of Resistance ranges and slide switches to allow easy addition and subtraction of resistance values.

Differential Pressure Manometer used to measure Differential Pressure in the range of -5000Pa to +5000Pa, with backlit LCD display and Data Hold.

This Digital Differential Pressure Manometer is used to measure Differential Pressure in the range of 0 – 5 PSI.

Differential Pressure Manometer measures negative, positive and differential pressure. Option for 11 measurement units: bar, ozin², psi, mbar, mmHg,

Digital KWh Meter with LCD Display for Three phase Three wire Two element loads

96 x 96 mm sq, with 2NO + 2NC, Two Set Point, for K, J, R, S, PT-100 (Any One). (Despatch for this instrument will be post 5-7 days of the order, as

Infrared Temperature controller for -50 to 950 Degree C, 50:1 D:S Ratio, adjustable emissivity, relay output, controller cut out 72 x 72 mm sq

4-1/2 Digits Red LED Display, panel flush mounting AC Voltmeter, for measuring AC Voltage, Size – 96 x 96 mm, range 0 – 20mV / 200mV / 2V / 200V / 10

3-1/2 Digits Red LED Display, panel flush mounting DC Voltmeter, for measuring DC Voltage, Size – 96 x 96 mm, range 0 – 20mV / 200mV / 2V / 200V / 10

3-1/2 Digits Red LED Display, panel flush mounting AC Voltmeter, for measuring AC Voltage, Size – 96 x 96 mm, range 0 – 20mV / 200mV / 2V / 200V / 10

4-1/2 Digits Red LED Display, panel flush mounting AC Voltmeter, for measuring AC Voltage, Size – 96 x 48 mm, range 0 – 20mV / 200mV / 2V / 200V / 10

3-1/2 Digits Red LED Display, panel flush mounting DC Voltmeter, for measuring DC Voltage, Size – 96 x 48 mm, range 0 – 20mV / 200mV / 2V / 200V / 10

Three Phase Three Wire Two Element loads for energy and power measurement, measure each phase I, V, Hz, PF, KW, KVA, KVAr, KWh, KVAh, KVArh and MDI

Digital Temperature Controller, 4 Digits Display, up to 1200 Degree C, 96 x 96 mm sq, with 1NO + 1NC, Single Set Point, for K, J, PT-100 (User Progra

Digital Temperature Controller, 4 Digits Display, up to 1200 Degree C, 72 x 72 mm sq, with 1NO + 1NC, Single Set Point, for K, J, PT-100 (User Progra

Insulated Three Phase 11-33kV FRP Telescopic Earth/Discharge Rod manufactured in fully-automatic Pultrusion Plant having strong electrical & mechanic

Laser Distance Meter to measure up to 100m, with Area / Volume Calculations

Laser Distance Meter to measure up to 40m, with Area / Volume Calculations

Digital Ultrasonic Distance Meter to measure up to 16m.

4 Digits LCD, 32 X 65 mm Clamp Jaw, with Bluetooth, Data Hold, Open Clamp Jaw Indication, Range 0.010 to 1500 Ohms. Maximum Resolution 0.001 Ohms.

NEW LAUNCH! Micro Ohms Meter for 3 Phase Transformers. Current 02A/0.5/2/5/10/20A, Resistance 0.1uΩ – 5000Ω, 4 wire test method, Short Circuit Curren

NEW LAUNCH!! 9999 digits, 35mm Ultra-thin Jaws, 2500VDC, 1500VAC, 1000AAC, 1000ADC & DC Power 2000kW (using external flexible clamp), Low-pass Filter

Multi-channel Data Logger with IoT. 8 groups of different modules can be inserted for various data acquisitions and functions, like relay output, pow

Digital Ammeter with Two Set Point to control the current below a given pair of set points. Size – 96 x 96 mm sq. With 2NO + 2NC Contact. Auxiliary P

3-1/2 Digits Panel Flush Mounting AC Ammeter, Size – 96 x 48 mm, For Shunt Operated 75mV or for Direct Operated up to 20A AC. For Shunt Operated the

3-1/2 Digits Panel Flush Mounting AC Ammeter, Size – 96 x 96 mm , For Shunt Operated 75mV or for Direct Operated up to 20A AC. For Shunt Operated the

4-1/2 Digits Panel Flush Mounting AC Ammeter, Size – 96 x 96 mm, For Shunt Operated 75mV or for Direct Operated up to 20A AC. For Shunt Operated the

4-1/2 Digits Panel Flush Mounting AC Ammeter, Size – 96 x 48 mm , For Shunt Operated 75mV or for Direct Operated up to 20A AC. For Shunt Operated the

3-1/2 Digits Panel Flush Mounting DC Ammeter, Size – 96 x 48 mm , For Shunt Operated 75mV or for Direct Operated up to 20A DC. For Shunt Operated the

3-1/2 Digits Panel Flush Mounting DC Ammeter, Size – 96 x 96 mm, For Shunt Operated 75mV or for Direct Operated up to 20A DC. For Shunt Operated the

4-1/2 Digits Panel Flush Mounting DC Ammeter, Size – 96 x 96 mm, For Shunt Operated 75mV or for Direct Operated up to 20A DC. For Shunt Operated the

4-1/2 Digits Panel Flush Mounting DC Ammeter, Size – 96 x 48 mm , For Shunt Operated 75mV or for Direct Operated up to 20A DC. For Shunt Operated the

Microprocessor Based, 96 x 96 mm sq, with in built three phase selector switch, displays Current in three phases, CT Ratio programmable. Programmable

4-1/2 Digits Red LED Display, panel flush mounting DC Voltmeter, for measuring DC Voltage, Size – 96 x 48 mm, range 0 – 20mV / 200mV / 2V / 200V / 10

4-1/2 Digits Red LED Display, panel flush mounting AC Voltmeter, for measuring AC Voltage, Size – 96 x 96 mm, range 0 – 20mV / 200mV / 2V / 200V / 10

3-1/2 Digits Red LED Display, panel flush mounting AC Voltmeter, for measuring AC Voltage, Size – 96 x 48 mm, range 0 – 20mV / 200mV / 2V / 200V / 10

Microprocessor Based, 96 x 96 mm sq, with in built three phase selector switch, displays Line to Line and Line to Neutral Voltage. Direct Operated an

6 Digits Red LED Display, Event Counter, 1 to 999999 Counts, 96 x 48 mm sq

8 Digits LED Frequency Counter 10Hz～2.4GHz with Period measurement 100ns～1s. High accuracy, fast measurement speed.

4 Digits, Panel Flush Mounting, 96 X 48 mm sq, Input 10 – 500V, Measuring range 20 – 99.99 Hz.

4 Digits, Panel Flush Mounting, 96 X 96 mm sq, Input 50 – 500V, Measuring range 0 – 9999 Hz.CE-500F 96 x 96

4 Digits, Panel Flush Mounting, 96 X 48 mm sq, Input 50 – 500V, Measuring range 0 – 999.9 Hz.

4 Digits, Panel Flush Mounting, 96 X 96 mm sq, Input 50 – 500V, Measuring range 0 – 9999 Hz.

7 Digits, measures up to 99999.99 hours, 230V AC / 110V AC (Any One) operated, 46 x 46 mm sq size panel cutout

7 Digits, measures up to 99999.99 hours, 10V AC / 48V AC (Any One) operated, 46 x 46 mm sq size panel cutout

7 Digits, measures up to 99999.99 hours, 220V AC / 110V AC (any one) operated, 46 x 46 mm sq size panel cutout

7 Digits, measures 99999.99 hours, 10 – 48V DC operated, 46 x 46 mm sq size panel cutout

Three Phase Four Wire Three Element loads for energy and power measurement, measure each phase I, V, Hz, PF, KW, KVA, KVAr, KWh, KVAh, KVArh and MDI

Digital KWh Meter with LCD Display for Three Phase Four wire Three Element loads.

Digital Ampere, Volt, Frequency and Watt meter combined in 96 x 96 mm sq for single phase loads.

Digital Phase Angle Meter, 96 x 96 mm sq, can measure Phase Angle between Voltage and Current.

Microprocessor Based, 96 x 96 mm sq, For Single Phase, Red LED Display.

Microprocessor Based, 96 x 48 mm sq, For Single Phase, Red LED Display.

Microprocessor Based, 96 x 96 mm sq, For 3 Phase 4 Wire 3 Element, Red LED Display.

Microprocessor Based, 96 x 96 mm sq, For 3 Phase 3 Wire 2 Element , Red LED Display.

6 Channel Digital Multi-Point Temperature Indicate for K, J,R, S, PT-100 (Any One) type of sensor

Digital Temperature Indicator 96 x 48 mm sq, for K, J, R, S, PT-100 (Any One)

Digital Temperature Indicator 96 x 96 mm sq, for K, J, R, S, PT-100 (Any One)

6 Digits LED Display, 96 x 96 mm sq, Auto range from 9999.99 to 999999Hrs.

12 Channel Digital Multi-Point Temperature Indicate for K, J,R, S, PT-100 (Any One) type of sensor

4 Digits LCD, 65 X 32 mm Clamp Jaw, Data Hold, Open Clamp Jaw Indication, Range 0.01Ω to 1500Ω. Maximum Resolution 0.001 Ohms.

ELCB/RCD Tester to test and measure the trip values of ELCB/RCD/RCCB -in trip time (expressed in ms) or -in trip current value (expressed in mA).

Digital ELCB Tester with Current Rating up to 500mA, Trip Test, Fault Trip Time, Self Powered, verifies wiring connection, 2000mS readout for testing

Digital ELCB Tester with Current Rating up to 500mA, Trip Test, Fault Trip Time, DC Test, Auto Ramp Test, Self Powered, verifies wiring connection, 1

Digital ELCB Tester with Current rating up to 500mA featuring Auto Ramp,Phase Switch, Reads Disconnection Time. Battery-powered.

Multifunction Tester for measurement of T-RMS Insulation Resistance, Continuity, Low Resistance, RCD types A, AC, B, B+, F , Loop Impedance, Line Imp

Socket Polarity & Earth Leakage Tester. Checks for No Earth / Line Neutral Reversal / No Neutral / Line Earth Reversal / No Line states.

6 Digits LED Display, 96 x 48 mm sq, Auto range from 9999.99 to 999999Hrs.

Microprocessor Based, 96 x 96 mm sq, For Three Phase Four Wire Three Element, Red LED Display.

Microprocessor Based, 96 x 96 mm sq, For Three Phase Three Wire Two Element, Red LED Display.

Microprocessor Based, 96 x 96 mm sq, For Three Phase Four Wire Three Element, Red LED Display.

Microprocessor Based, 96 x 96 mm sq, For Three Phase Three Wire Two Element, Red LED Display.

Digital Voltmeter with Two Set Point to control the Voltage between a given set points.Size – 96 x 96 mm sq. With 2NO + 2NC Contact. Auxiliary Power

Microprocessor Based, 96 x 96 mm sq, For Single Phase, Red LED Display

Microprocessor Based, 96 x 48 mm sq, For Single Phase, Red LED Display

Microprocessor Based, 96 x 96 mm sq, For 3 Phase 4 Wire Three Element, Red LED Display

Insulated, Single Phase, Telescopic Earth/Discharge Rod manufactured in fully-automatic Pultrusion Plant having strong electrical & mechanical streng

Microprocessor Based, 96 x 96 mm sq, For 3 Phase 3 Wire Two Element, Red LED Display

Automatic Phase Detection from 10V to 500kV, test Phase, Frequency, Phase Frequency, along with Electricity Testing & Line Circuit Voltage display. 3

Self-operated, Phase Rotation Indicator along with voltage and frequency display. Detects 50 – 500V and 20 – 400Hz.

Electrical Socket Tester with RCD/GFCI Test Button & large, backlit LCD display. Socket sequence test. Three hole socket Line Neutral Earth (L-N-E) d

Socket Polarity Tester to be used for currents up to 6A and input voltage up to 250V AC, when inserted in the plug, it indicates whether the connecti

Socket Polarity Tester to be used for currents up to 16A and input voltage up to 250V AC, when insterted in the plug, it indicates whether the connec

4 Digits LCD, 32 X 65 mm Clamp Jaw, with Bluetooth, Data Hold, Open Clamp Jaw Indication, Range 0.010 to 1500 Ohms. Maximum Resolution 0.001 Ohms, Wi

4 Digits LCD, 32mm Clamp Jaw Dia, Data Hold, Open Clamp Jaw Indication, Range 0.01Ω to 1500Ω. Maximum Resolution 0.001 Ohms.

4 Digits LCD, 32 X 55 mm Clamp Jaw, Data Hold, Open Clamp Jaw Indication, Range 0.010 to 200 Ohms. Maximum Resolution 0.001 Ohms.

4 Digits LCD, 35 mm Elliptical Clamp Jaw, Range 0.01Ω to 1500Ω, Max Resolution 0.001Ω, Data Hold, Open Clamp Jaw Indication. With USB Interface & Rec

Explosion Proof Clamp On Ground Resistance Tester, 32 X 65 mm Clamp Jaw, Data Hold, Open Clamp Jaw Indication, Range 0.010 to 1200Ω. Maximum Resoluti

4 Digits LCD, 32 mm Clamp Jaw, Data Hold, Open Clamp Jaw Indication, Range 0.01Ω to 200Ω. Maximum Resolution 0.001Ω

4 Digits LCD, 32 X 65 mm Clamp Jaw, with Bluetooth, Data Hold, Open Clamp Jaw Indication, Range 0.01Ω – 200Ω Ohms. Maximum Resolution 0.001 Ohms.

4 Digits LCD, 32mm Clamp Jaw, with Bluetooth, Data Hold, Open Clamp Jaw Indication, Range 0.010 to 1500 Ohms. Maximum Resolution 0.001 Ohms, With Lea

4 Digits LCD, 32mm Clamp Jaw, with Bluetooth, Data Hold, Open Clamp Jaw Indication, Range 0.010 to 1500 Ohms. Maximum Resolution 0.001 Ohms.

Double Clamp, Multi-function, Earth and Grounding Resistance Tester for on-site measurement of grounding resistance, soil resistivity, grounding volt

Non-contact Voltage Detector features flashing light and buzzer sound for detecting presence of 100V – 1000V. It also features a built-in, bright fla

The Swiss army knife for electricians. Only tester measuring DC Current via Fork Jaw. 4 digit backlit display. Fork Opening 16mm. Up to 1500V with LE

Digital Resistance Earth Tester for 0 – 10 / 100 / 1000 Ohms, 4 Terminal with Testing Kit and Cables in a hard carrying case.

With Telescopic insulated rod, hook probe and LCD Display. Voltage to Earth measurement, 30V~35kV DC & AC Voltage Detection & Measurement, Induced Vo

The Swiss army knife for electricians. Measures AC Current via Fork Jaw. 4 digit backlit display. Fork Opening 16mm. Up to 1500V with LED light alarm

Contact type, light and buzzer indication, detects presence of High Voltage in AC Lines, 354 to 1005mm length, detects 3kV to 24kV AC and 80 to 600V

Contact type, Light and Buzzer indication, detects presence of High Voltage in AC Lines, expandable from 1370mm to 2450mm, detects 3kV to 81.5kV AC

A handy, wearable (wrist-type), close-range, non-contact, high voltage detector, featuring sound & light alarms when an operator wearing it gets clos

Non Contact Type High Voltage Detector for presence of Voltage from 50V to 132kV with Buzzer and Light Indication

Earth Resistance Tester for 0 – 20 / 200 / 2000 Ohms, 4 Terminal with Testing Kit and Cables in a hard carrying case.

Smart, Multifunction, Installation Tester, Socket size. Test/measure/record Socket Polarity, ELCB/RCD, PSC, Earth Loop, Voltage and Harmonics. Auto D

Multifunction Installation Tester with a 3.5″ TFT colour LCD display, provides Insulation Resistance, Earth Resistance, Loop Impedance, Voltage, RCD,

Loop Impedance Tester with PSC, microprocessor controlled, high accuracy. 3 LEDs for checking correct wiring status. 15mA LOOP measurement: LOOP impe

Phase Rotation Indicator, no battery required, Nominal Voltage 40 – 690V, 15 to 400Hz.

A handy, wearable (helmet-type), close-range, non-contact, low voltage detector, featuring sound & light alarms. When an operator wearing it gets clo

A handy, wearable (wrist-type), close-range, non-contact, low voltage detector, featuring sound & light alarms. When an operator wearing it gets clos

Precision 4-wire, 3-wire and simple 2-wire measurement for Earth Resistance, Soil Resistivity, Earth Voltage and AC Voltage. Complete kit in hard car

Two-pole Voltage Tester with LCD display and LED signalling. Features Audible Continuity and RCD tripping test. Built-in LED flashlight, IP64 dust an

A handy, hard hat/helmet accessory, close-range non-contact high voltage detector, featuring sound & light alarms when an operator wearing it gets cl

Non-contact AC Voltage Detector by flashing, high intensity, Red light alarm & beeping for 50V – 1000V, with built-in flash light. CAT III 1000V, CAT

Audio and Visual output on detecting voltage from 90V – 1000V AC with built-in flashlight.

4 Digits Backlit LCD Display, Data Hold, Max Record, Measures Air Velocity up to 30m/Sec, measures in km/hr, ft/min, knots, mph as well, Displays Air

Solar Power Meter / Sunlight Meter, to measure the sunlight intensity falling on solar panels or on any surface exposed to sunlight, using a sensitiv

High Voltage Detectors (Electroscope) for electrical testing on high voltage transmission lines upto 500kV, with audible buzzer and visual light alar

High Voltage Detectors (Electroscope) for electrical testing on high voltage transmission lines upto 275kV, with audible buzzer and visual light alar

A handy, wearable (arm-type), close-range non-contact high voltage detector, featuring sound & light alarms when an operator wearing it gets close to

Non Contact type, Light and Buzzer Indication, Detects Presence of High Voltage in AC Lines, 240V, 2KV, 6KV, 11KV, 22KV, 33KV, 132KV and 175KV Lines

Non-contact Voltage Detector for 12V〜1000A AC in 2 ranges with LED and buzzer alarms and built in flashlight. Also has a non-contact Magnetic Field d

Measures up to 0 – 20/200/2000/200000/200,000 Lux / Ft Candle with Max Hold & Data Hold.

Measures up to 400000 Lux /40000 Ft Candle , Data & Peak Hold, Max Min Record, USB PC Interface, Backlit LCD With Analogue Bargraph.

4 Digits Backlit LCD Display, MAX / MIN Record, Data Hold, Digital Lux Meter, Can measure up to 200,000 Lux, Also measures in FC (Foot Candle), High

Gauss Meter for both static and electromagnets, DC and AC (40-500Hz), determines N/S polarity of Static Magnets, can measure intensity of magnetic fi

Measures from 0.1 to 200mG / 1 to 2000mG & 0.01 to 20uT / 0.1 to 200uT, Frequency Response 30Hz to 400Hz, Max Hold and Data Hold

Particle count upto.3, 2.5 and 10μm, PM 2.5 and PM 10 Mass Concentration. Detect, measure and record Formaldehyde Gas (HCHO), Carbon Dioxide (CO2), T

Air Particle Counter to measure up to 6 channels of particle sizes, Air Temperature, Relative Humidity, Dew Point & Wet Bulb Temperature, HCHO and CO

Air Particle Counter to measure up to 6 channels of particle sizes, Air Temperature, Relative Humidity, Dew Point & Wet Bulb Temperature. With TFT LC

Smart, multi-function Thermo-anemometer measures Wind Speed, Temperature, Humidity, Dew Point, Wet Bulb Temperature, Wind Chill, Air Volume. Data Log

Digital Hot Wire Anemometer with telescopic thin probe, dual display LCD, USB interface, measures 0.1 to 25m/sec and Temperature from 0 to 50°C.

To measure Air Velocity and Airflow in tight or hard-to-reach spaces using a Pitot Tube. Simultaneous display of Pressure, Airflow/Velocity and Tempe

Digital Thermo-Anemometer with facility to measure wind flow (CFM / CMM)

Thermo-anemometer with backlit LCD display, Data Hold, Max/Avg Records. Measures Air Velocity up to 30m/sec, measures in km/hr, ft/min, knots, mph as

Digital Thermo-Anemometer with facility to measure up to 45m/Sec and in ft/min also

Digital Thermo-Anemometer with facility to measure wind flow (CFM/CMM) inbuilt Pressure Meter.

Digital Thermo-Anemometer with facility to measure wind flow (CFM / CMM) with built-in Infrared Thermometer.

Digital Thermo-Anemometer 30m/Sec with Metal Blades, Temp. -10 to 60°C / 14 to 140°F.

Digital Lux Meter measuring upto 200000 Lux with backlit display, high accuracy, selectable range, MAX/MIN/REL, Data Hold, User-selectable unit and r

4 Digits Backlit LCD Display, Data Hold, Hi/Lo Indication, Split Probe, Lux and Foot Candle Measurement, Auto Power Off, Lo-Battery Indication, Measu

Measures up to 200,000 Lux / Ft Candle with Max Hold and Data Hold.

Measures up to 200,000 Lux / Ft Candle with Peak Hold and Data Hold.

Measures up to 50,000 Lux.

Pocket Lux Meter to measure luminosity from 0 to 100,000 Lux along with ambient temperature. Accuracy ±(3%+5Lux). Backlit LCD with Max/Min readings,

Differential Pressure Manometer used to measure Differential Pressure in the range of -5000Pa to +5000Pa, with backlit LCD display and Data Hold.

High-precision HCHO (Formaldehyde) and TVOC (Total Volatile Organic Compounds) meter with backlit LCD display, dual readings, Data Hold and Max/Min.

Thermo-hygro Meter with dual backlit display, measures Temperature -20° to 60°C and Humidity 0% to 100%RH with high accuracy.

Non-contact Infrared Thermometer for industrial use; upto 250°C with backlit LCD display, D:S=8:1, adjustable Emissivity, 2m drop tested

Measures visible light up to 400000 Lux from luminaries equipped with white light LED, fluorescent, metal halide, high-pressure sodium and incandesce

Measures up to 50,000 Lux / Ft Candle with Max Hold and Data Hold.

4 Digital Backlit LCD, Sound Level Meter, Fast & Slow Response, Data Hold, MAX/MIN Record, A Weighting, Measures sound in the range of 30dB to 130dB

A professional, conductivity moisture tester designed to measure moisture content in wood, sawn timber, cardboard, paper, as well as hardened materia

Digital Sound Level Meter for 30dB to 130dB with backlit 3 1/2 digits display, data hold, Min/Max, Slow/Fast response and ±1.5 dB accuracy.

3-1/2 Digits, has A & C Weighting, measures in the range of 35 to 130 dB, with data hold and maximum hold, with built in calibration check.

3-1/2 Digits Industrial Thermometer, measures from -200 to 1300°C / -50 to 1999°F, Contact type, to be used with K type thermocouple , with backlit d

Professional, multifunction, intelligent Weather Station, high accuracy, measurements of Wind Speed & Direction, Rainfall, Temperature & Humidity, Ai

Professional, multifunction, intelligent Weather Station, high accuracy, measurements of Wind Speed & Direction, Rainfall, Temperature & Humidity, Ai

3-1/2 Digits Backlit LCD Dual Display, Measures Temperature in Celsius and Fahrenheit scales in the range of -10 to 60 Degree C with resolution of 0.

Pocket Sound Level Meter with Electric Condenser Microphone & built-in high performance sensor. 30~130dB. Accuracy ±1.5dB (94dB@1KHz), ±5dB (94dB@8KH

3-1/2 Digits Backlit LCD, has A & C Weighting, measures in the range of 30 to 130 dB, with max. hold.

4 Digits, has A & C Weighting, measures in the range of 30 to 130 dB, USB PC Interface, with Max/Min Data Hold and Data Logging facility.

Digital Thermo-Hygro Meter with facility to measure wet bulb and dew point temperature

Large LCD display for digital temperature & humidity, with alarm clock, min & max temperature & humidity reading, comfort level indication and option

Compact temperature and humidity meter with clock and alarm facility, -50 to 70 Degree C, 20% to 99%RH. Comes with a jumbo LCD display and wall hangi

LCD Display, wall hanging, with time and alarm facility, calander, climatic condition display, 0 to 50 Degree C, 10% to 90%RH

Temperature and Humidity Data Logger with dual display LCD, Data Logging up to 32700 points, USB PC interface, PDF & XLS data file download, long-las

Large LCD display for digital temperature humidity meter with date and clock display. Temperature range: -10°C ~ 50°C, Humidity range: 20 ~ 95%RH

Backlit LCD Dual Display, with split type Sensor for temperature and Humidity, Data Hold, MAX / MIN Record, Auto Power Off, Measure Temperature from

Wide Temperature Range, High Accuracy, Battery Operated, Selectable Thermocouple between K / J type, MAX / MIN / AVG Recording, Data Hold to Freeze D

The dual channel contact thermometer offers fast response and laboratory accuracy. This thermometer works with two K-type or J-type thermocouples as

Hand Held, With High and Low Temperature Alarm Facility, Auto Power Off, Data Hold, -50 to 300°C / -58 to 572°F

3 1/2 digits, compact, lightweight, general-use, industrial digital thermometer, which can measure -100°C to 1200°C depending on the type of sensor b

Digital Thermo-Hygro Meter with K-type thermometer. Has Backlit LCD Display

Quick-response capacitance sensor, accurate measurement for wet bulb globe temperature (WBGT), black globe temperature (TG), humidity (%RH), air temp

25MHz DDS Function Generator, 250MSa/s sampling rate, 12 bit wide waveform generator, Pre-installed 17 common waveforms, high accuracy & resolution.

10 MHz DDS Function generator, 125MSa/s Sampling Rate, 1 μHz Frequency resolution, 14 bits Vertical resolution, 45 built-in waveforms and user define

12MHz DDS Function Generator, 250MSa/s sampling rate, 12 bit wide waveform generator, Pre-installed 17 common waveforms, high accuracy & resolution.

25 MHz DDS Function generator, 125MSa/s sampling rate

5 MHz DDS Function generator, 125MSa/s Sampling Rate, 1 μHz Frequency resolution, 14 bits Vertical resolution, 45 built-in waveforms and user defined

5MHz Function Generator with Sine, Square, Triangle waves output, Six LED digits display, Signal Amplitude of 20Vp-p output.

Pen Type, Auto Power Off, -40 to 250°C / -40 to 482°F

Quick-response capacitance sensor, accurate measurement for wet bulb globe temperature(WBGT), black globe temperature(TG), humidity(%RH), air tempera

High-precision, 1A Micro Ohms Meter for 0.001mΩ ~ 300.0kΩ, Resolution up to 1μΩ, Accuracy ±0.1%FS, Measurement Current ≤ 1A, with Data Logging for 49

Multifunction Tester for measurement of T-RMS Insulation Resistance, Continuity, Low Resistance, RCD types A, AC, B, B+, F , Loop Impedance, Line Imp

Multifunction Installation Tester with a 3.5″ TFT colour LCD display, provides Insulation Resistance, Earth Resistance, Loop Impedance, Voltage, RCD,

3-3/4 digits, backlit LCD, T-RMS, wide AC/DC Ampere range (4.000 to 1000A), bar graph, high resolution, best accuracy, one-touch zero, Inrush current

AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic), Duty Cycle, Diode Test, Insulation Test and Continuity, T

Tester with Thermal Imager, VFD, Digital Insulation. Resistance with Polarisation Index and DAR measurement, Low Resistance measurement using 4 wire

6MHz DDS Function Generator, 250MSa/s sampling rate, 12 bit wide waveform generator, Pre-installed 17 common waveforms, high accuracy & resolution. W

70MHz Dual-Channel Arbitrary Waveform Generator, 125MSa/s Sample Rate, 14-Bit Resolution, 150 Built-in Waveforms, 3.6″ TFT LCD Function Generator, Po

35MHz Dual-Channel Arbitrary Waveform Generator, 125MSa/s Sample Rate, 14-Bit Resolution, 150 Built-in Waveforms, 3.6″ TFT LCD Function Generator, Po

120MHz DDS Function generator, 320MSa/s sampling rate.

80MHz DDS Function generator, 320MSa/s sampling rate.

60 MHz DDS Function generator, 125MSa/s sampling rate

Carbon Monoxide Meter to detect the presence of Carbon Monoxide (CO) and measures concentrations between 1-1000 parts per million (PPM).

Detects Presence of Carbon Mono-Oxide. Range 0 to 1000PPM with Record Mode, backlit LCD, LED & beeper alarm.

1MHz Function Generator with Sine, Square, Triangle waves output, Six LED digits display, Signal Amplitude of 20Vp-p output.

Transformer Turns Ratio Set with Software & App for Data Transfer. Measure actual transformer ratio 0.9~10000 & group test. Monitoring software, test

Insulated Three Phase 11-33kV FRP Telescopic Earth/Discharge Rod manufactured in fully-automatic Pultrusion Plant having strong electrical & mechanic

3MHz Function Generator with Sine, Square, Triangle waves output, Six LED digits display, Signal Amplitude of 20Vp-p output.

With Telescopic insulated rod, hook probe and LCD Display. Voltage to Earth measurement, 30V~35kV DC & AC Voltage Detection & Measurement, Induced Vo

0.005MΩ ~30 TΩ, 50V/250V/500V/1kV/2.5kV/5kV/10kV/15kV, Accuracy ±5%rdg±3dgt, Large Touchscreen with Multifunction Colour Display. Test Voltage, Capac

0.005MΩ ~20 TΩ, 50V/250V/500V/1kV/2.5kV/5kV/10kV, Accuracy ±5%rdg±3dgt, Large Touchscreen with Multifunction Colour Display. Test Voltage, Capacitanc

A handy, wearable (arm-type), close-range non-contact high voltage detector, featuring sound & light alarms when an operator wearing it gets close to

2MHz Function Generator with Sine, Square, Triangle waves output, Six LED digits display, Signal Amplitude of 20Vp-p output.

Intelligent, portable Ammonia Detector 0-100ppm & 0.1ppm resolution. With built-in pump detection mode. Integrated water vapour and dust filter for u

Multiple gas analyser to measure Oxygen, Carbon Monoxide and Carbon Dioxide. Can also measure the Air Temperature and Humidity. With data logging for

Six-in-one Pumping Multi Gas detector for 6 gases: Oxygen (O2), Carbon Di Oxide (CO2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Nitrogen Di Oxid

Portable, 4-in-1 Multi-Gas Detector to detect Explosive Gas (EX), Oxygen (O2), Carbon Monoxide (CO) and Hydrogen Sulphide (H2S) continuously and simu

Detects Presence of Carbon Mono-Oxide. Range 0 to 1000PPM with Data Hold.

16″ Gooseneck detector for Combustible Gas leakage. With Audio and Visual Alarm.

Combustible Gas Detector and Alarm with high sensitivity, compact design and reliable performance for detecting combustible gas (like LPG) leaks. Fea

Portable sampling pump suitable for long time, continuous sampling of toxic gas in the air and is compatible with the Metravi GD-09-4M 4-in-1 Gas Det

Double Clamp, Multi-function, Earth and Grounding Resistance Tester for on-site measurement of grounding resistance, soil resistivity, grounding volt

0.50MΩ ~ 10.00TΩ, 250V/500V/1000V/2500V/5000V/10kV, Accuracy ±5%, with Polarisation Index measurement (PI); Absorption Ratio (DAR); Ramp Test mode (R

0.50MΩ ~ 5.00TΩ, 250V/500V/1000V/2500V/5000V/5kV, Accuracy ±5%, with Polarisation Index measurement (PI); Absorption Ratio (DAR); Ramp Test mode (RAM

Megohmmeter/ high-voltage insulation resistance tester, used for insulation resistance tests upto 15KV and 0.01MΩ ~ 50TΩ. Functions: Insulation resis

Megohmmeter/ high-voltage insulation resistance tester, used for insulation resistance tests upto 10KV and 0.01MΩ ~ 35TΩ. Functions: Insulation resis

High-precision HCHO (Formaldehyde) and TVOC (Total Volatile Organic Compounds) meter with backlit LCD display, dual readings, Data Hold and Max/Min.

Portable, Single Gas Detector, customisable for more than 30 gases, with sound, light & vibration alarms. Rechargeable battery, IP65, explosion-proof.

Portable and world’s smallest Oxygen Gas Detector with audio & visual alarms. Detects Oxygen in the air.

16″ Gooseneck sensor, detects all CFC Refrigerants such as R-22, R-124, R-11 and R-12 etc.

A handy, hard hat/helmet accessory, close-range non-contact high voltage detector, featuring sound & light alarms when an operator wearing it gets cl

A handy, wearable (wrist-type), close-range, non-contact, high voltage detector, featuring sound & light alarms when an operator wearing it gets clos

Non Contact Type High Voltage Detector for presence of Voltage from 50V to 132kV with Buzzer and Light Indication

Megohmmeter/ high-voltage insulation resistance tester, used for insulation resistance tests upto 5KV and 0.01MΩ ~ 10TΩ. Functions: Insulation resist

Insulated, Single Phase, Telescopic Earth/Discharge Rod manufactured in fully-automatic Pultrusion Plant having strong electrical & mechanical streng

DC High Voltage Test Set for various capacities from 40kV to 130kV voltage output and leakage current output from 0 to any range required. Note: Ran

AC High Voltage Test Set for various capacities from 80kV to 100kV voltage output and leakage current output from 0 to any range required. Note: Ran

AC High Voltage Test Set for various capacities from 35kV to 75kV voltage output and leakage current output from 0 to any range required. Note: Rang

DC High Voltage Test Set for various capacities from 3kV to 35kV voltage output and leakage current output from 0 to any range required. Note: Range

Primary Current Injection testing is done with the aim to identify how a heavy electrical system operates under various levels of current loads. By i

0.005MΩ ~10 TΩ, 50V/250V/500V/1kV/2.5kV/5kV, Accuracy ±5%rdg±3dgt, Large Touchscreen with Multifunction Colour Display. Test Voltage, Capacitance, Cu

High Voltage Detectors (Electroscope) for electrical testing on high voltage transmission lines upto 500kV, with audible buzzer and visual light alar

High Voltage Detectors (Electroscope) for electrical testing on high voltage transmission lines upto 275kV, with audible buzzer and visual light alar

Relay Test Set suitable for testing distance relay, 3 phase current / voltage output and Fixed DC Voltage output

Relay Test Set with 200A in various ranges, Burden 1KVA, with AC/DC Voltage output

Relay Test Set, with current output upto 200A in various ranges

High Voltage Rescue Hook for up to 66kV with 2m long FRP Rod in 2 section telescopic rod with dia of 35mm, hook opening 450mm, hook load 120kgs.

High Voltage Rescue Hook for up to 33kV with 1.5m long FRP Rod in 1 section, rod dia 35mm, hook opening 450mm, hook load 120kgs

AC High Voltage Test Set for various capacities from 3kV to 30kV voltage output and leakage current output from 0 to any range required. Note: Range

Transformer Turns Ratio Set to measure ratio in the range of 0.800 to 2021 & for Phase Deviation Measurement

Non Contact type, Light and Buzzer Indication, Detects Presence of High Voltage in AC Lines, 240V, 2KV, 6KV, 11KV, 22KV, 33KV, 132KV and 175KV Lines

Hot Line Indicator, Neon Glow type for 6.6kV / 11kV / 33kV

Hot Line Indicator, Neon Glow type for 6.6kV / 11kV / 33kV

Hot Line Indicator, Neon Glow type for 6.6kV / 11kV / 33kV

High Voltage Rescue Hook for up to 66kV with 2m long FRP Rod in 2 section telescopic rod with dia of 35mm, hook opening 450mm, hook load 120kgs.

Contact type, Light and Buzzer indication, detects presence of High Voltage in AC Lines, expandable from 1370mm to 2450mm, detects 3kV to 81.5kV AC

Hot Line Indicator, Neon Glow type for 6.6kV / 11kV / 33kV

40 Pin Digital IC Tester to test 54 / 74 series TTL and 4000 & 4500 series CMOS IC’s, tests more than 2000 kinds of devices.

Non-contact, high-precision, Infrared Thermometer for measuring human body temperature with two measurement modes, for body as well as surface.

A non-touch Infrared Thermometer to measure human body temperature via the hand wrist & palm. Uses 2 sensors – a distance sensor and a temperature se

4 digits LCD, adjustable emissivity from 0.10 to 1.00, telescopic sighting measures in the range of 500ºC to 3000ºC and in ºF scale, distance to sigh

Non-contact Infrared Thermometer for -50° to 2200°C with D:S Ratio of 75:1. Features Dot Matrix Backlit LCD, Bluetooth, up to 32000 data points, adju

High Voltage Rescue Hook for up to 33kV with 1.5m long FRP Rod in 1 section, rod dia 35mm, hook opening 450mm, hook load 120kgs

AC High Voltage Test Set for various capacities from 80kV to 100kV voltage output and leakage current output from 0 to any range required. Note: Ran

AC High Voltage Test Set for various capacities from 35kV to 75kV voltage output and leakage current output from 0 to any range required. Note: Rang

AC High Voltage Test Set for various capacities from 3kV to 30kV voltage output and leakage current output from 0 to any range required. Note: Range

DC High Voltage Test Set for various capacities from 40kV to 130kV voltage output and leakage current output from 0 to any range required. Note: Ran

DC High Voltage Test Set for various capacities from 3kV to 35kV voltage output and leakage current output from 0 to any range required. Note: Range

Hot Line Indicator, Neon Glow type for 6.6kV / 11kV / 33kV

Hot Line Indicator, Neon Glow type for 6.6kV / 11kV / 33kV

Temperature range 1000℃～3000℃, D:S 300:1, Output 4～20mA, RS485, Relay – 1A30VDC/0.5A125VAC, Impedance：≤50mΩ, IP-65 Casing

Temperature range 700℃～1800℃, D:S 300:1, Output 4～20mA, RS485, Relay – 1A30VDC/0.5A125VAC, Impedance：≤50mΩ, IP-65 Casing

Temperature range 600℃～1400℃, D:S 150:1, Output 4～20mA, RS485, Relay – 1A30VDC/0.5A125VAC, Impedance：≤50mΩ, IP-65 Casing

Digital Insulation Resistance Tester with Buil-in Multimeter, 3-3/4 Digits 3999 Counts, Backlit LCD, Data Hold, Test Voltage: 250V / 500V / 1000V, up

3 1/2 Digits 1999 Counts, 0.00MΩ~11.0GΩ at 250V / 500V / 1000V, Accuracy ±3%+5dgt, with DC Open Circuit Voltage, Short Circuit Current, Rated Test Cu

3 1/2 Digits 1999 Counts, 0.00MΩ~22.0GΩ at 500V / 1000V / 2500V, Accuracy ±2%+3dgt, with DC Open Circuit Voltage, Short Circuit Current, Rated Test C

Digital Battery Cum Mains Operated Insulation Tester for 1000V / 2G.Ohms

Measures from -50 to 2200°C / -58 to 3992°F with dual laser pointer to show the diameter of the area for which temperature is being measured, contact

Measures -40°C to 1600°C with dual laser pointer, Adjustable Emissivity from 0.10 ~ 1.0, D:S Ratio 50:1, Resolution 0.1°C, Contact K-type temperature

Measures -50°C to 800°C with Circular Laser pointer, Adjustable Emissivity from 0.10 ~ 1.00, D:S Ratio 12:1, Contact K-type temperature upto 500°C, C

Dual Laser Pointer, Colour Display, Video and Still picture recording, In-built Contact Thermometer, uSD Card & PC interface, -50 to 1850°C, Adjustab

4 Digits, Backlit LCD, Contact cum Non Contact type, measures from -50 to 1050 °C in Non Contact model and -50 to 1370 °C in Contact Mode, Emissivity

Digital Insulation Resistance Tester with Buil-in Multimeter, 3-3/4 Digits 3999 Counts, Backlit LCD, Data Hold, Test Voltage: 250V / 500V / 1000V, up

3 Digits Backlit LCD with laser sighting used to measure temperature in the range of -50°C to 550°C / -58°F ~ 1022°F, D:S Ratio 12:1, Fixed emissivit

4 Digits Backlit LCD, Contact cum Non Contact type, measures -50 to 1300°C/-58 to 2372°F in non contact mode and contact mode. D:S Ratio 30:1, Emissi

Measures -40°C to 1200°C with dual laser pointer, Adjustable Emissivity from 0.10 ~ 1.0, D:S Ratio 50:1, Resolution 0.1°C, Contact K-type temperature

Measures from -50 to 1200°C / -58 to 2192°F with dual laser pointer, contact cum non-contact type, with USB PC Interface and with Max./Min./Dif/AVG.,

3 1/2 Digits 1999 Counts, 0.00MΩ~11.0GΩ at 250V / 500V / 1000V, Accuracy ±3%+5dgt, with DC Open Circuit Voltage, Short Circuit Current, Rated Test Cu

Digital Battery Cum Mains Operated Insulation Tester for 1000V / 2G.Ohms

Measure Photovoltaic (PV) live insulation resistance 4000MΩ, ordinary insulation resistance function (non-live), AC and DC voltage automatic recognit

The Metravi Pro 65 Max+ is a Non-contact cum Contact Infrared Thermometer or Pyrometer for up to 1000°C with a unique Circular laser indicator that s

0.005MΩ ~30 TΩ, 50V/250V/500V/1kV/2.5kV/5kV/10kV/15kV, Accuracy ±5%rdg±3dgt, Large Touchscreen with Multifunction Colour Display. Test Voltage, Capac

Megohmmeter/ high-voltage insulation resistance tester, used for insulation resistance tests upto 15KV and 0.01MΩ ~ 50TΩ. Functions: Insulation resis

3 1/2 Digits 1999 Counts, 0.00MΩ~22.0GΩ at 500V / 1000V / 2500V, Accuracy ±2%+3dgt, with DC Open Circuit Voltage, Short Circuit Current, Rated Test C

3 1/2 Digits, 1999 Counts, 2000MΩ @250V / 20GΩ @500V / 20GΩ @1000V / 20GΩ @2500V, Accuracy: ±3% with Data Hold, Zero function and Auto Polarity indic

0.50MΩ ~ 5.00TΩ, 250V/500V/1000V/2500V/5000V/5kV, Accuracy ±5%, with Polarisation Index measurement (PI); Absorption Ratio (DAR); Ramp Test mode (RAM

To measure -50°C to 550°C, D:S Ratio 8:1, Fixed Emissivity 0.95, Backlit LCD with laser sighting.

Megohmmeter/ high-voltage insulation resistance tester, used for insulation resistance tests upto 5KV and 0.01MΩ ~ 10TΩ. Functions: Insulation resist

Battery cum Mains Operated, with facility to measure, PI, DAR, AC Voltage, Low Resistance, Continuity, 500V/6G.Ohms, 1000V/6G.Ohms, 2500V/60G.Ohms, 5

Battery cum Mains Operated, with facility to measure AC Voltage, Low Resistance, Continuity, 500V/2000M.Ohms, 1000V/2000M.Ohms, 2500V/20G.Ohms, 5000V